Tile Adhesive
For tile installations, construction companies would use a mixture of cement, sand, and water. However, cement is only efficient at holding bricks together. It’s not good at holding tiles together.
Whether you use wall or floor tile,tile adhesive is expected to hold the tile in place not just for years but for decades—without fail.
It must be easy to work with, and it must adequately fill in gaps between the tile and the substrate.
It cannot cure too fast: Otherwise, you do not have adequate working time.
But if it cures too slowly, it takes forever to get to the grouting stage
That's why they need come with additional admixtures.
These mortar additives are specially formulated to give the tile adhesives added flexibility, crack resistance, adhesion, workability, hydrophobicity, and final product consistency.
Recommended products:
Product Info | Polymer Base | Doc |
RDP KD 6002N | VAC-E | COA/TDS/MSDS |
Product Info | Viscosity (mPa.s) Brookfield Rv, 2% 20℃ | Doc |
KDOCEL HPMC 150M | 50,000 - 60,000 | COA/TDS/MSDS |
KDOCEL HPMC 200M | 65,000 - 80,000 | COA/TDS/MSDS |
Product Info | Purity | DOC |
Calcium Formate | 98% | COA/TDS/MSDS |
Product Info | Viscosity (mPa.s) Brookfield5% ,20℃ | DOC |
Starch ether KDO 210 | 3,500-5,500 | COA/TDS/MSDS |
Advantages of KDO tile adhesive admixtures:
1. Stronger bonding strength, better tensile adhesion strength
2. Crack & Sag resistance
3. Prevent tile slippage
4. Better compressive & flexible strength
5. High water retention, Longer open time
6. Freeze thaw resistance
7. Easy to operate and construction
Previous: None
Next: Wall putty/Skim coat